Drilled Hole and ChemCam Marks at 'Cumberland'
The Chemistry and Camera (ChemCam) instrument on NASA's Mars rover Curiosity was used to check the composition of gray tailings from the hole in rock target "Cumberland" that the rover drilled on May 19, 2013.
PASADENA, Calif. - NASA's Mars Science Laboratory mission is approaching its biggest turning point since landing its rover, Curiosity, inside Mars' Gale Crater last summer.

Curiosity is finishing investigations in an area smaller than a football field where it has been working for six months, and it will soon shift to a distance-driving mode headed for an area about 5 miles (8 kilometers) away, at the base of Mount Sharp.

In May, the mission drilled a second rock target for sample material and delivered portions of that rock powder into laboratory instruments in one week, about one-fourth as much time as needed at the first drilled rock.

"We're hitting full stride," said Mars Science Laboratory Project Manager Jim Erickson of NASA's Jet Propulsion Laboratory, Pasadena, Calif. "We needed a more deliberate pace for all the first-time activities by Curiosity since landing, but we won't have many more of those."

No additional rock drilling or soil scooping is planned in the "Glenelg" area that Curiosity entered last fall as the mission's first destination after landing. To reach Glenelg, the rover drove east about a third of a mile (500 meters) from the landing site. To reach the next destination, Mount Sharp, Curiosity will drive toward the southwest for many months.

"We don't know when we'll get to Mount Sharp," Erickson said. "This truly is a mission of exploration, so just because our end goal is Mount Sharp doesn't mean we're not going to investigate interesting features along the way."

Images of Mount Sharp taken from orbit and images Curiosity has taken from a distance reveal many layers where scientists anticipate finding evidence about how the ancient Martian environment changed and evolved.

While completing major first-time activities since landing, the mission has also already accomplished its main science objective. Analysis of rock powder from the first drilled rock target, "John Klein," provided evidence that an ancient environment in Gale Crater had favorable conditions for microbial life: the essential elemental ingredients, energy and ponded water that was neither too acidic nor too briny.

The rover team chose a similar rock, "Cumberland," as the second drilling target to provide a check for the findings at John Klein. Scientists are analyzing laboratory-instrument results from portions of the Cumberland sample. One new capability being used is to drive away while still holding rock powder in Curiosity's sample-handling device to supply additional material to instruments later if desired by the science team.

For the drill campaign at Cumberland, steps that each took a day or more at John Klein could be combined into a single day's sequence of commands. "We used the experience and lessons from our first drilling campaign, as well as new cached sample capabilities, to do the second drill campaign far more efficiently," said sampling activity lead Joe Melko of JPL. "In addition, we increased use of the rover's autonomous self-protection. This allowed more activities to be strung together before the ground team had to check in on the rover."

The science team has chosen three targets for brief observations before Curiosity leaves the Glenelg area: the boundary between bedrock areas of mudstone and sandstone, a layered outcrop called "Shaler" and a pitted outcrop called "Point Lake."

JPL's Joy Crisp, deputy project scientist for Curiosity, said "Shaler might be a river deposit. Point Lake might be volcanic or sedimentary. A closer look at them could give us better understanding of how the rocks we sampled with the drill fit into the history of how the environment changed."

For more about the mission, visit: http://www.nasa.gov/msl .
You can follow the mission on Facebook and Twitter at: http://www.facebook.com/marscuriosity and http://www.twitter.com/marscuriosity .

Watch related video.

  • From 'Glenelg' to Mount Sharp

    This map shows where NASA's Mars rover Curiosity landed in August 2012 at "Bradbury Landing"; the area where the rover worked from November 2012 through May 2013 at and near the "John Klein" target rock in the "Glenelg" area; and the mission's next major destination, the entry point to the base of Mount Sharp.



    The precise route has not been...

    more
  • This is a sequence of images from the Front Hazard-Avoidance Camera on NASA's Mars rover Curiosity that shows the rover drilling into rock target "Cumberland."

    This sequence of images from the Front Hazard-Avoidance Camera on NASA's Mars rover Curiosity shows the rover drilling into rock target "Cumberland." The drilling was performed during the 279th Martian day, or sol, of the Curiosity's work on Mars (May 19, 2013). The video runs at accelerated speed and loops the sequence of images four times. The...

    more
  • 'Point Lake' Outcrop in Gale Crater, Raw Color

    One priority target for a closer look by NASA's Mars rover Curiosity before the rover departs the "Glenelg" area east of its landing site is the pitted outcrop called "Point Lake," in the upper half of this image. The outcrop as seen from this angle is about 7 feet (2 meters) wide and 20 inches (50 centimeters) high.



    The texture, with its voids...

    more
  • Concretions at 'Cumberland'

    This image taken by the Mars Hand Lens Imager (MAHLI) on NASA's Mars rover Curiosity shows the texture of the patch of flat-lying bedrock called "Cumberland," which was the mission's second target for use of the rover's sample-collecting drill. Cumberland was selected to be similar to the first, "John Klein," but with a slightly greater...

    more
  • Concretions at 'Cumberland'

    This image taken by the Mars Hand Lens Imager (MAHLI) on NASA's Mars rover Curiosity shows the texture of the patch of flat-lying bedrock called "Cumberland," which was the mission's second target for use of the rover's sample-collecting drill. Cumberland was selected to be similar to the first, "John Klein," but with a slightly greater...

    more
  • Checking Contact Points for Curiosity's Drill

    This image demonstrates how engineers place the drill carried by NASA's Mars rover Curiosity onto rock targets. They first set down the drill's two stabilizing prongs near the target, as shown by the dashed line. From there, they assess the placement of the prongs in relation to the target to determine the correct, final placement of the drill....

    more
  • Checking Contact Points for Curiosity's Drill

    This image demonstrates how engineers place the drill carried by NASA's Mars rover Curiosity onto rock targets. They first set down the drill's two stabilizing prongs near the target, as shown by the dashed line. From there, they assess the placement of the prongs in relation to the target to determine the correct, final placement of the drill....

    more
  • 'Point Lake' Outcrop in Gale Crater

    One priority target for a closer look by NASA's Mars rover Curiosity before the rover departs the "Glenelg" area east of its landing site is the pitted outcrop called "Point Lake," in the upper half of this image. The outcrop as seen from this angle is about 7 feet (2 meters) wide and 20 inches (50 centimeters) high.



    The texture, with its voids...

    more
  • Drilled Hole and ChemCam Marks at 'Cumberland'

    The Chemistry and Camera (ChemCam) instrument on NASA's Mars rover Curiosity was used to check the composition of gray tailings from the hole in rock target "Cumberland" that the rover drilled on May 19, 2013. This image taken by the rover's Mast Camera during the mission's 281st Martian day, or sol, (May 21, 2013) shows a row of small pits...

    more
  • Position of Curiosity for Drilling at 'Cumberland'

    This image produced from software used for planning drives of NASA's Mars rover Curiosity depicts the location and size of the rover when it was driven into position for drilling into rock target "Cumberland." Cumberland was the mission's second drilling target. This image also shows the proximity to the first drilling target, "John Klein,"...

    more
  • Position of Curiosity for Drilling at 'Cumberland'

    This image produced from software used for planning drives of NASA's Mars rover Curiosity depicts the location and size of the rover when it was driven into position for drilling into rock target "Cumberland." Cumberland was the mission's second drilling target. This image also shows the proximity to the first drilling target, "John Klein,"...

    more
  • This image from the Mast Camera (Mastcam) on NASA's Mars rover Curiosity shows inclined layering known as cross-bedding in an outcrop called "Shaler" on a scale of a few tenths of meters, or decimeters (1 decimeter is nearly 4 inches).

    This image from the Mast Camera (Mastcam) on NASA's Mars rover Curiosity shows inclined layering known as cross-bedding in an outcrop called "Shaler" on a scale of a few tenths of meters, or decimeters (1 decimeter is nearly 4 inches). The superimposed scale bar is 50 centimeters (19.7 inches). An unannotated version is also available.

    This...

    more
  • The "Shaler" outcrop is dramatically layered, as seen in this mosaic of telephoto images from the right Mast Camera (Mastcam) on NASA's Mars rover Curiosity.

    The "Shaler" outcrop is dramatically layered, as seen in this mosaic of telephoto images from the right Mast Camera (Mastcam) on NASA's Mars rover Curiosity. In some portions of the outcrop, patterns in the layering provide evidence of stream flow.

    The images combined into this mosaic were taken between 12:34 and 1:00 p.m. local Mars solar time...

    more

2013-187

Guy Webster 818-354-6278
Jet Propulsion Laboratory, Pasadena, Calif.
guy.webster@jpl.nasa.gov

You Might Also Like